Product systems: Special joints

SF 100 Acid-resistant grout 2c

SF 100

BOTAMENT® SF 100 is a mineralic-inorganic silicate joint mortar for joint widths between 3 and 15 mm.

The product is suited for grouting wall and floor coverings in areas which are heavily exposed to acids. BOTAMENT® SF 100 has been developed especially for the application in areas with particular requirements as for example in food production, pharmaceutical industry or power plants.

  • High resistance to plenty of acids
  • High temperature resistance
  • Antistatic
  • High compressive and flexural strength
  • Good flank adhesion
Application areas

Grouting of:


  • vitreous and porcelain stoneware
  • artificial stone slabs
  • floor clinker slabs
  • heavy clay
Suitable substrates

 

Substrate preparation

In order to prevent discoloration the tile adhesive must be fully set and cured before grouting can commence. 

Storage

frost-free, cool and dry at least 12 months in its original sealed container

Mixing ratio

18 - 20 % liquid requirement

Processing time

~ 60 minutes

Walkable

after ~ 24 hours

Can withstand mechanical loading

after ~ 24 hours

Can withstand chemical loading

after ~ 7 days

  • first pour the liquid component into a clean mixing container
  • then add the measured powder component
  • mix up carefully for 3- 5 minutes with a slow rotating agitator (max. 400 rpm) until a homogeneous mass has been achieved
  • grout tile covering using a special grout float
  • pre-wash the surface using a hydro sponge and continue with the final cleaning immediately
  • change cleaning water every 10 m²
  • do not remix stiffening material
  • protect the fresh grouting from moisture (direct laying of foils is not allowed)
application conditions required

+ 12 °C bis + 30 °C

general 3 °C over dew point

relative humidity ≤ 85 %

Consumption or Usage

format (cm): 24 x 11.5 (split tiles)

joint width (mm): 8

joint depth (mm): 10

= 2.40 kg/m²


format (cm): 10 x 10

joint width (mm): 5

joint depth (mm): 8

= 1.72 kg/m²

Vital information

BOTAMENT® SF 100 is a special product. Training is required for first use.


Caution: BOTAMENT® SF 100 causes chemical burns in contact with eyes, skin and respiratory tracts. During the processing suitable protective clothing has to be worn necessarily.


Store in original container only. Do not tranfer BOTAMENT® SF 100 to containers made of zinc, aluminium or other light metals.

Container
Container Dispatch unit sold by the pallet Product number EAN Code
30 kg unit (25 kg Powder; 5 kg Liquid component ) Paper sack anthrazite - - 52100000375709 4030905110043
Downloads
Usage calculator

Select a packaging unit

Paper sack"anthrazite" (30)

Tile length (mm)
Tile width (mm)
Tile thickness (mm)
Desired tile width (mm)
Area to be grouted (m2)
Supplier search
Safety datasheets