Product systems: Natural stone

MULTISTONE Multi-functional Tile and Natural Stone Adhesive

MULTISTONE
en_C2_FT_S1_S2
en_EC1plus
en_staubreduziert

MULTISTONE® is a multi-functional light-weight tile adhesive for the fitting of almost all of almost all natural stones as well as ceramic wall and floor coverings in interior and exterior areas. Due to the airflow Technology MULTISTONE® is particularly easy and smooth to handle.

  • Highly stable and highly flexible
  • Particularly well suited for large format sizes
  • High yield (goes a long way)
  • Rapid curing with crystalline water bonding
  • Dust-reduced formulation
  • For levelling unevenesses up to 30 mm
  • Suitable for swimming pools and potable water containers
Application areas

Bonding of:

  • Natural stones
  • vitreous stoneware and porcelain
  • non-vitreous stoneware
  • split tiles
  • floor clinker tiles, clinker tiles and Cotto
  • hand-made tiles
  • small, medium and glass mosaics
  • glass tiles
  • insulation and lightweight building boards


Very smooth boards (e.g. rigid foam slabs) must be roughened up prior to bonding.

Suitable substrates
  • concrete, lightweight concrete, and porous concrete
  • joint full brickwork
  • plasters of the mortar categories CS II, CS III and CS IV in accordance with DIN EN 998 and gypsum plaster in accordance with DIN EN 13279 (Compressive strength ≥ 2.5 N/mm²)
  • BOTAMENT building boards
  • old tiling
  • gypsum walls, gypsum plaster boards and gypsum fibreboards
  • cement screeds and calcium sulphate screeds
Substrate preparation

The substrate must be in the following condition:

  • dry, clean and frost-free
  • stable
  • free from grease, paint, cement laitance, separating agents, sinter layers and loose particles


Absorbent substrates must be primed with BOTAMENT D 11.

Storage

cool and dry at least 9 months in its original sealed container

Mixing ratio

Mixing ratio S1:

levelling mortar = ~ 3.6 l of water/ 15 kg

thick-bed = ~ 3.6 l of water/ 15 kg

medium-bed = ~ 3.8 l of water/ 15 kg

thin-bed = ~ 4.5 l of water/ 15 kg

pourable bed = ~ 4.8 l of water/ 15 kg


Mixing ratio S2:

thin-bed = 3.75 l BOTAMENT® D 10 + 0.75 l water/15kg

pourable bed = 4.0 l BOTAMENT® D 10 + 0.8 l water /15kg

Maturing time

~ 3 minutes

Open time

~ 20 minutes

Processing time

~ 30 minutes

Maximum layer thickness

30 mm

Walkable

after ~ 3 hours

Fully loadable

after ~ 48 hours

Can be grouted

after ~ 3 hours

Mix up using cold, clean water while stirring with a slow rotating agitator until a homogenous, stiff and paste-like mass has formed

Application and substrate temperature

+ 5 °C to + 25 °C

Consumption or Usage

Consumption thin-bed:

6 mm notched trowel = ~ 2.0 kg/m²

8 mm notched trowel = ~ 2.6 kg/m²

10 mm notched trowel = ~ 3.0 kg/m²


Consumption medium-bed:

~ 4.0 kg/m²


Consumption pourable bed:

8 mm notched trowel = ~ 2.5 kg/m²

10 mm notched trowel = ~ 2.8 kg/m²

Vital information

When installing ceramic coverings all existing standards and guidelines in their current versions must be observed.

Container
Container Dispatch unit sold by the pallet Product number EAN Code
15 kg Paper sack cremewhite - 50 Units/s 49224000315609 4030905080506
Downloads
Supplier search
Safety datasheets