Product systems: Terrachamp

BTF 200 TERRACHAMP Balcony and terrace joint mortar 2c

BTF 200 TERRACHAMP
en_Hydro

 

BOTAMENT® BTF 200 TERRACHAMP is a diffusion-open reaction resin joint mortar suitable for slurry application to install floor coverings on balconies and terraces. BOTAMENT® BTF is suitable for joint widths of 3 to 15 mm. BOTAMENT® BTF 200 TERRACHAMP must exclusively be used together with BOTAMENT® BTK 200 TERRACHAMP Balcony and Terrace Adhesive as a system.


 

  • Highly vapour-diffusion-open system
  • Excellent adhesion to tile edges
  • Easy to wash with cold water
  • Revolutionary colour fastness without colour pigments
  • Optimal application even at high temperatures
  • For almost all ceramic tiles and natural stones slabs not prone to discolouration
  • High protection against efflorescence by HYDRO O2 Flex-Technology
Application areas

 

Grouting of:




  • vitreous stoneware and porcelain

  • split tiles

  • floor clinker slabs and clinker tiles

  • hand-made tiles

  • many natural stone types


 

Substrate preparation

 

The joints must be in the following condition:




  • dry to slightly damp and clean

  • free from adhesive materials, separating agents and loose particles


 

Storage

 

frost-free, cool and dry at least 12 months in its original sealed container

 

Mixing ratio

 

15.7 (A) : 1 (B)

 

Processing time

 

~ 30 minutes

 

Walkable

 

after ~ 24 hours

 

 

 


  • add B component to A component and mix both together with a slowly rotating mixer for at least 3 minutes

  • to avoid mixing mistakes re-pot the binder agent after mixing into a clean container (scratch container absolutely clean) and mix up again

  • grout tile cover using a foamed rubber or special jointing board

  • prewash surface with a hydro sponge (for contoured coverings use a soft fleece sponge) and then carry out the final clean (wash until clean)

  • renew washing water frequently

  • don't mix material again that has started to set



The exact mixing ratio as stated by the manufacturer must be adhered to.


 

Application and substrate temperature

 

+ 10 °C to + 30 °C

 

Consumption or Usage

 

tile format (cm) 24 x 11.5 (split tiles) joint width (mm) 8 joint depth (mm) 10 = 1.49 kg/m² tile format (cm) 20 x 20 joint width (mm) 5 joint depth (mm) 8 = 0.54 kg/m²


 

Container
Container Dispatch unit sold by the pallet Product number EAN Code
5 kg Plastic bucket grey (Nr. 24) - 33 Units/s 96550700195609 4030905131352
Downloads
Supplier search
Safety datasheets