Product systems: primer

E 120 Multi-functional resin 2c

E 120

BOTAMENT® E 120 is a universal epoxy resin for use on absorbent and non-absorbent substrates.

  • Excellent bonding
  • Moisture blocker for cement screeds up to 6 %
  • For critical and highly stressed substrates
  • Binder agent to produce epoxy resin mortars
  • Suitable for the renovation of substrates containing PAH
  • Very good penetration capability
  • Low-viscosity
Application areas
  • priming and protection against moisture penetration of calcium sulphate screeds
  • priming of smoothed, highly impervious concrete surfaces
  • priming for the subsequent coating levels and waterproofing on a reaction resin basis
  • bonding course for coatings and mortar on a reaction resin basis
  • scratch coats, blowhole and levelling filling




Substrate preparation

The substrate must be in the following condition:

  • clean and frost-free
  • stable
  • free from grease, separating agents and loose particles




Storage

cold and frost-free at least 12 months in its original sealed container

Mixing ratio

3 (A) : 1 (B)

Processing time

~ 30 minutes

Walkable

after ~ 12 hours

Fully loadable

after ~ 7 days

  • add B component to A component and mix both together with a slowly rotating mixer for at least 3 minutes
  • to avoid any mixing mistakes re-pot BOTAMENT® E 120 afterwards into a clean container (scratch the container clean) and mix again



BOTAMENT® E 120 as primer prior to fitting of tiles:

  • pour ready-mixed material onto the substrate and distribute evenly with a rubber squeegee or roller
  • while fresh, scatter BOTAMENT® E 120 with dried quartz sand of grain size 0.5 - 1.2 mm all over



BOTAMENT® E 120 as primer prior to application of reaction resin waterproofing:

  • pour ready-mixed material onto the substrate and distribute evenly with a rubber squeegee or roller
  • work over BOTAMENT® E 120 within 24 hours with the reaction resin waterproofing (other than that, while still fresh scatter dried quartz sand of grain size 0.1 - 0.3 mm all over




Application and substrate temperature

+ 10 °C to + 30 °C

Consumption or Usage

~ 100- 300 g/ m²

Container
Container Dispatch unit sold by the pallet Product number EAN Code
1 kg Tin transparent 6 per box - 51705010115609 4030905120073
10 kg Tin bucket transparent - - 51705010245609 4030905120127
200 kg Stammkomponente A Barrel - - 51705030545609 4030905120189
200 kg Härtekomponente B Barrel - - 51705020545609 4030905120196
Downloads
Supplier search
Safety datasheets