Product systems: Terrachamp

BTK 200 TERRACHAMP Balcony and Terrace Adhesive 2c R2


BOTAMENT® BTK 200 TERRACHAMP is a diffusion-open reaction resin adhesive mortar for floor coverings on balconies and terraces.

Onto drainage systems or mortars BOTAMENT® BTK 200 TERRACHAMP must exclusively be used together with BOTAMENT® BTF 200 TERRACHAMP Balcony and Terrace Joint Mortar as a system.

In case of using BOTAMENT® BTK 200 TERRACHAMP for laying floor coverings directly onto composite sealants the grouting has to be done with MULTIFUGE® Diamond.

  • Highly vapour-diffusion-open system
  • Flexibility newly defined and greatly exceeding the requirements of DIN EN 12002
  • High resistance against freeze-thaw cycles
  • Unique application characteristics
  • Installation without need for the combined method
  • For almost all ceramic tiles and natural stones slabs not prone to discolouration
  • Highest adhesive tensile and bending tensile strengths
  • 100 % lime and cement-free – no efflorescence
Application areas

Bonding of:

  • vitreous stoneware and porcelain
  • split tiles
  • floor clinker slabs and clinker tiles
  • hand-made tiles
  • many natural stone types
Suitable substrates
  • standard drainage mats and membranes for tile and floor coverings
  • BOTAMENT® BTD 200 TERRACHAMP Drainage Mortar
Substrate preparation

The substrate must be in the following condition:

  • dry to slightly damp and clean
  • stable
  • free from separating agents and loose particles
  • in true alignment and perpendicular or with a gradient of at least 1.5%

frost-free, cool and dry at least 6 months in its original sealed container

Mixing ratio

7.3 (A) : 1 (B)

Open time

~ 15 minutes

Processing time

~ 30 minutes


after ~ 24 hours

  • add B component to A component and mix both together with a slowly rotating mixer for at least 3 minutes
  • to prevent mixing errors pour BOTAMENT® BTK 200 TERRACHAMP afterwards into a clean container (scratch the container clean) and mix again
  • apply BOTAMENT® BTK 200 TERRACHAMP with a notched trowel (observe open time)
  • Press tiles using light pressure and a side-to-side movement into the adhesive bed and position

The exact mixing ratio as stated by the manufacturer must be adhered to

Application and substrate temperature

+ 10 °C to + 30 °C

Consumption or Usage

8 mm notched trowel ~ 3.4 kg/m²

10 mm notched trowel ~ 3.8 kg/m²

Container Dispatch unit sold by the pallet Product number EAN Code
10 kg Plastic bucket grey - 33 Units/s 96550000245609 4030905131529
Supplier search
Safety datasheets