Product systems: Tile fitting

M 10 Speed Flexible Rapid Adhesive C2 TE

M 10 Speed
en_Speed

BOTAMENT® M 10 Speed is a flexible thin-bed and pourable bed adhesive for tilings which has to be jointed and loaded extremly fast. The product is suitable for the fitting of almost all ceramic wall and floor coverings in interior and exterior areas.

  • Ready to be jointed and walked on after ~ 90 minutes
  • Can be used in low temperatures
  • For heated areas
  • Flexible
  • certificated as a system in connection with the BOTAMENT® Sealing and Decoupling Membrane




Application areas

Bonding of:

  • vitreous stoneware and porcelain
  • non-vitreous stoneware
  • split tiles
  • floor clinker slabs and clinker tiles
  • small and medium-sized mosaics
  • concrete slabs
  • natural stone slabs that are not susceptible to discolouration
  • insulation and lightweight building boards


Very smooth boards (e.g. rigid foam slabs) must be roughened up prior to bonding.

Suitable substrates
  • concrete, lightweight concrete, and porous concrete
  • joint full brickwork
  • plasters of the mortar categories CS II, CS III and CS IV in accordance with DIN EN 998 and gypsum plaster in accordance with DIN EN 13279 (compressive strength ≥ 2.5 N/mm²)
  • BOTAMENT® building boards
  • old tiling
  • gypsum walls, gypsum plaster boards and gypsum fibreboards
  • cement screeds and calcium sulphate screeds




Substrate preparation

The substrate must be in the following condition:

  • dry, clean and frost-free
  • stable
  • free from grease, paint, cement laitance, separating agents, sinter layers and loose particles


Absorbent substrates must be primed with BOTAMENT® D 11.

Storage

cool and dry at least 9 months in its original sealed container

Mixing ratio

thin-bed ~ 6.5 l of water / 25 kg

pourable bed ~ 7.5l of water / 25 kg

Maturing time

~ 2 minutes

Open time

~ 15 minutes

Processing time

~ 20 minutes

Maximum layer thickness

5 mm

Walkable

after ~ 90 minutes

Fully loadable

after ~ 12 hours

Can be grouted

after ~ 90 minutes


  • mix up using cold, clean water while stirring with a slow rotating agitator until a homogenous, stiff and paste-like mass has formed




Application and substrate temperature

+ 3 °C to + 20 °C

Consumption or Usage

6 mm notched trowel ~ 2.3 kg/m²

8 mm notched trowel ~ 2.8 kg/m²

10 mm notched trowel ~ 3.6 kg/m²

Vital information

When installing ceramic coverings all existing standards and guidelines in their current versions must be observed.

Container
Container Dispatch unit sold by the pallet Product number EAN Code
5 kg Paper sack light grey - 96 Units/s 49146000196009 4030905080865
25 kg Paper sack light grey - 40 Units/s 49146000376009 4030905080438
Downloads
Supplier search
Safety datasheets