Product systems: Nivelliermassen und Ausgleichsmörtel

M 200 Multi-mortar

M 200
cz_c1t
en_Speed
en_EC1plus_R

BOTAMENT M 200 Multi-mortar is one-component, hydraulically hardening mortar with a wide range of application options. Amongst others it is suitable for the levelling of substrates in interior and exterior areas, for the closing of gaps in walls and floors, for the application of tiles and slabs and for the bonding of blocks and bricks.

  • For layer thicknesses of 2 up to 30 mm
  • Excellent stableness and high adhesion power
  • Tested according to EN 12004: C1 T
  • Can be extended with sand up to 50 mm
  • Early load capacity
Application areas
  • levelling, trowelling and plastering of uneven areas on walls and floors
  • filling of gaps, defects and holes
  • application of tiles and slabs
  • for partition walls and bonding of blocks and bricks
  • manufacturing of sanitary partition walls such as in front of washbasins, bathtubs, shower trays and built-in flushing tanks
  • as plaster in chlorinated underwater areas
  • constructing of composite screeds and slope screeds onto small areas
  • bonding of mineral building boards, gypsum plaster boards and cement fibreboards


Suitable substrates


  • concrete and lightweight concrete
  • brickwork
  • cement screeds 
  • old tiling
  • cement and lime cement plasters of the mortar categories CS II, CS III and CS IV in accordance with EN 998 (compressive strength ≥ 2.5 N/mm²)




Substrate preparation

The substrate must be in the following condition:



  • • clean and frost-free
  • stable
  • free from grease, paint, cement laitance, separating agents and loose particles


Please also note:


  • gypsum based substrates must be primed with BOTAMENT® D 11 first of all (1 x undiluted)
Storage

cool and dry

at least 9 months in its original sealed container

~ 1.7 kg/ dm³

Mixing ratio

~ 6,5- 7,0 l water/ 25 kg

Processing time

at + 23 °C ~ 45 minutes

at + 10 °C ~ 50 minutes

at + 5 °C ~ 60 minutes

Can withstand mechanical loading

after ~ 2- 2,5 hours

  • mix up using cold, clean water while stirring with a slow rotating agitator 
  • thereafter apply BOTAMENT® M 200 Multi-mortar immediately using a suitable tool (trowel)


Application and substrate temperature

+ 5 °C to + 30 °C

Consumption or Usage

~ 1,3 kg/ m²/ mm

Vital information

You can view or download the safety datasheet at www.botament.com.

Additional information

Further technical details can be found in our technical data sheets on our website www.botament.com.

Container
Container Dispatch unit sold by the pallet Product number EAN Code
25 kg Paper sack grau - - 18902000375609 4030905060379
5 kg Paper sack grau - - 18902000195609 4030905060393
Downloads
Supplier search
Safety datasheets