Product systems: Natural stone

BOTAMENT® M 13 Stone is a rapidly setting natural stone mortar for fitting wall and floor coverings made of almost all calibrated and not calibrated natural stones in interior and exterior areas.

• Fast curing
• For heated areas
• Highly stable
• Colour: light grey
• High protection against efflorescence and discoloration

Bonding of natural stones such as granite, porphyry, quartzite, Solnhofen slabs and marble

• concrete, lightweight concrete and porous concrete
• joint full brickwork
• plasters of the mortar categories CS II, CS III and CS IV (compressive strength ≥ 2.5 N/mm²)
• BOTAMENT® Bauplatten [building boards]
• old tiling
• gypsum walls, gypsum cardboard and gypsum fibreboards
• cement screeds and calcium sulphate screeds

The substrate must be in the following condition:

• dry, clean and frost-free
• stable
• free from grease, paint, cement laitance, separating agents, sinter layers and loose particles

Absorbent substrates must be primed with BOTAMENT® D 11.

cool and dry at least 9 months in its original sealed container

~ 5.0- 6.0 l water / 25 kg

~ 2 minutes

~ 15 minutes

~ 40 minutes

30 mm

after ~ 3 hours

after ~ 3 hours

• mix up using cold, clean water while stirring with a slow rotating agitator until a homogenous, stiff and paste-like mass has formed.

+ 5 °C to + 30 °C

consumption medium bed: ~ 5.4 kg/m²

When fitting natural stones all existing standards and guidelines in their current versions must be observed.